Blog For Free!
Archives
Home
2008 September
2008 July
2008 May
2007 September
2007 August
2007 June
2006 December
2006 November
2006 September
2006 July
2005 December
2005 September
2005 February
2004 December
2004 October
tBlog
My Profile
Send tMail
My tFriends
My Images
Sponsored
Blog
|
| Gear |
| 07.21.08 (6:02 am) [edit] |
|
A gear is a wheel with teeth around its circumference, the purpose of the teeth being to mesh with similar teeth on another mechanical device possibly another gear wheel so that force can be transmitted between the two strategies in a direction tangential to their surfaces. A non-toothed wheel can transmit some tangential force but will slip if the force is large; teeth put off slippage and permit the transmission of large forces.
A gear can mesh with any device having teeth friendly with the gear's teeth. Such devices include racks and other non-rotating policy; however, the most common condition is for a gear to be in mesh with another gear. In this case revolution of one of the gears necessarily causes the other gear to rotate. In this way, rotational motion can be transferred from one position to another. While gears are sometimes used simply for this reason to transmit rotation to another shaft perhaps their most significant feature is that, if the gears are of asymmetrical sizes, a mechanical advantage is also achieved, so that the rotational speed, and torque, of the second gear are dissimilar from that of the first. In this way, gears provide a means of increasing or decreasing a turning speed, or a torque.
|
|
|
| |
|
|
